|
|
|
|---|
LIGHTS
TO GO!
NBB200
series - LED Traffic Signals
Lights To Go is proud to offer our new line of energy efficient, LED Traffic Signals for ALL your traffic light needs. These are new Traffic Lights that use 10% of the power and operate for 10+ years without changing a bulb. Universal voltage 120-240VAC input, Power factor corrected, Energy star, Green certified for worldwide use. These signals can pay for themselves with energy savings alone when compared to a conventional incandescent. They are made of rugged, lightweight, polycarbonate, designed for years of reliable, continuous outdoor service. The Gloss Black polycarbonate body standard Safety Yellow also now available. Easy to use and easy to hang. Universal mounting brackets are included with each signal light. Suitable for Wall, Pole or Mast arm mounting. Low voltage, 12-24V DC version are now also available. Less than 8 Watts, easy to drive with solar / alternative energy.
We provide these ALL LED Traffic Signals in several configurations:
|
NBY200RG RED /GRN LED Signal |
NBY200RG Side view |
We provide these for many, diverse applications, Including decorative use in private homes, restaurants, bars, casinos, safety schools, loading docks, game rooms, auto shops, car washes, auto dealers, water parks and amusement parks. They are also suitable for commercial / industrial applications, including factories, schools and call centers as Safety and Operational Status Lights. These units now have an integrated optical diffuser for indoor/ outdoor usage. The standard street model is made for 120VAC power and the viewing angle is 30Deg (ITE spec). We also stock a have a custom wide-angle type made exclusively for indoor specialty use with a 60Deg viewing angle. These are the DC powered 12 to 24V version.
Dimensions of the Red/Yellow/Green unit are: 10in wide x 30 inches tall by approx. 6 inches deep. The cap style (cutaway) visors extend another 7 inches from the face and are easily removable. The weight is 12 lbs. or about half that of a standard Aluminum signal. The lens diameter is a standard 8.2 inches or 200mm. Either Vertical or Horizontal mounting is possible, by simply rotating the visor 90 degrees. Wiring is easy to the internal terminal strip and each signal includes a knockout hole for standard 1/2" conduit connectors.
Whether you need 1 or 10, we have them in-stock and ready for your application. If you like you can wire them to your own switches or use your own Programmable Logic Control (PLC). If you want the a Safety Light that can be manually controlled to stay on one color until you change it, you can also order them with a selector switch (NB200/MAN), or an optional wireless Remote Control unit installed (NB200/RC).
NB200 RYG |
NB200 RG |
|
|---|---|---|
|
|
|
Other Module Color combinations available Lights To Go316 409-4911 |
LED Color |
Lens Diameter |
LED Qty |
Color wavelength |
Brightness |
Viewing Angle |
Power Consumption |
|---|---|---|---|---|---|---|
Red |
8inch (200mm) |
90 LED |
630 nM |
>400cd |
+/- 30 Deg |
< 8W |
Yellow |
8inch (200mm) |
90 LED |
590 nM |
>400cd |
+/- 30 Deg |
< 8W |
Green |
8inch (200mm) |
90 LED |
505 nM |
>400cd |
+/- 30 Deg |
< 8W |
Operating Temperature |
Input Voltage |
Ingress Protection |
|---|---|---|
-40* C~+80*C |
AC 120-240 50/60Hz Universal Input |
IP65 |
Material UV Stable Polycarbonate casing / lens with Silicon Seal |
|
|
We will ship signals anywhere in the US to the 48 contiguous states
Please Note: Although these
are fully weatherproof, Traffic Signals meeting ITE Specifications for roadway
use we caution against using these outdoors or where they can be viewed from a
public roadway, without permission/ authorization of local authorities to
install and operate such devices. Further the signals would need to
be connected to and controlled by an approved traffic control system. The
pre-wired signals listed below include limited functionality controls intended
for industrial status indication / special uses and are not marketed or intended
for any type of traffic control under any circumstances.
|
NB200 LED Signals now available in either Black or Yellow Housing |
Price |
|
|
NBB200RG - Basic Red/Green LED Signal, Gloss Black or Safety Yellow Poly Housing with 8 inch lens diameter, Ready to wire to your switching or Programmable Logic. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. - No control included, simple terminal strip connection to your switching / control Universal AC input 120-240 VAC 50/60Hz < 8W Maximum power |
259.00NBB200RG Black Yellow |
|
|
Basic Signal Light - Includes terminal strip for easy connection to your control/ switched power application. No control logic included with this model. Universal AC input 120-240 VAC 50/60Hz < 8W per Light Color Maximum power All Black & Yellow housing 3 Section LED signals are in stock. |
295.00NBB200 Black Yellow |
|
|
NB200/RC3 - Red/Yellow/Green LED Signal w/ Remote Control system installed with auto sequence, includes one handheld, long range, Remote Control. Gloss Black or Safety Yellow polycarbonate housing, with 8 inch Lens Diameter. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. Pre-wired for North America with 10ft - 120VAC Power Cord Installation is as easy as mount and plug in. includes 1 Remote Control for selection of static color of Flashing mode display. Not intended for control of vehicle traffic. Wired for 120VAC 50/60Hz < 8W Maximum power |
495.00NBB200RC3 Black Yellow |
|
|
NBB200/RC3A - Red/Yellow/Green LED Signal w/ Remote Control system installed with auto sequence, includes mounting brackets & one handheld Remote Control. Gloss Black or Safety Yellow polycarbonate housing, with 8 inch Lens Diameter. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. Pre-wired for North America with 10ft - 120VAC Power Cord includes 1 Remote Control for selection of Static color / Flashing mode/ and AUTO-CYCLING (Traffic Light) display. Not intended for control of vehicle traffic. Wired for 120 VAC 50/60Hz < 8W Maximum power.
|
495.00NBB200RC3A Black NBY200RC3A Yellow
|
|
|
NBB200/MAN - Red/Yellow/Green LED Signal w/ Manual selector switch installed includes Mounting brackets. Gloss Black or Safety Yellow polycarbonate housing, with 8 inch Lens Diameter. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. Pre-wired for North America with 10ft - 120VAC Power Cord includes 4 Position Selector Switch (on side of Green section) for selection of static color display. Universal AC input 120-240 VAC 50/60Hz < 8W Maximum power Not intended for control of vehicle traffic.
|
375.00NBB200MAN Black Yellow |
|
|
NB200RG/Man - Red/Green LED Signal w/ Manual selector switch installed and mounting brackets. Gloss Black or Safety Yellow polycarbonate housing, with 8 inch Lens Diameter. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. Pre-wired for North America with 10ft - 120VAC Power Cord also includes 4 Position Switch (on Green section) for selection of static color display. Universal AC input 120-240 VAC 50/60Hz < 8W Maximum power. |
345.00NBB200RGMAN Black Yellow |
|
|
NB200RG/RC2 - Red/Green LED Safety Signal w/ Remote control installed, Includes Mounting brackets & one handheld, Long Range, Remote Control. Gloss Black or Safety Yellow polycarbonate housing, with 8 inch Lens Diameter. Includes universal mounting "L" brackets for easy mounting in either vertical or horizontal applications. Removable aluminum cut-away style visors. Pre-wired for North America with 10ft - 120VAC Power Cord Installation is as easy as mount and plug in. includes 1 Remote Control for selection of static color or Flashing mode display. Not intended for control of vehicle traffic. Wired for 120VAC 50/60Hz < 8W Maximum power. |
455.00NBB200RGRC2 Black Yellow |
|
|
LRR - Long Range, 8 Key, Replacement Remote Control Hand held, Long Range Remote Control - 418 Mhz - up to 100 ft range. Works with all Lights To Go RC3 model control signals, 2004 to present. Perfect for replacement or spare unit. Recommended spare for critical usage installations. User programmable addressing. |
LRR45.00 ea.
|
|
|
|
|
