 LIGHTS
TO GO! |
|
|
| |
Model RC3 - Remote Control Kit
Add a wireless remote control to your std. 3 color Traffic Signal
If you
have a Green-Yellow-Red traffic light and would like to be able to control it remotely we now have our remote control kit available for purchase separately.
This kit includes a wireless keychain remote control and a compact integrated RF receiver/controller board that mounts inside your light.
This is the same unit that we use on our PS3/RC3 Safety Light.
The controler board is only 3 x 3 inches (excluding antenna) and fits neatly inside the case of your light and operates directly
from the 120VAC line. An easy to follow wiring diagram and hookup
instructions are included with each unit. All you have to do is mount
the control board, wire the lights to it and connect your power cord.
Because the remote uses Radio Frequency it is not limited to line of sight. Range is typically 20 to 50 feet with the 5 button key chain remote or 50 to 100 ft with the Long Range 8 button remote.
With Aluminum traffic lights you will need to drill a hole in the light to pass the antenna outside the case. With Poly Signals there is no need to extend the antenna outside the case.Model RC3 - 3 Light Remote Control
Specifications:
Wireless Keychain Remote included
418 MHZ (SAW) Controlled
Powered by long life Lithium Cell
3 Lamp output channels
120VAC TRIAC outputs for 100% LED compatibility
150W max. Lamp / channel,
6 position screw terminal
strip hookup
Wiring Diagram and Installation
Instructions included
|
|
The remote will control all light modes including steady, flashing and automatic cycling modes.
If you would light a new traffic Signal with the Remoto control unit already installed and wired.
Please visit our New Signals page
!
